Jotun Jotamastic 80 would normally cost between £9 and £11 per litre depending on the amount purchased. – Needs to be used within 2 hours of being mixed at 23 ✬ (this reduces to 1 Hour if using winter grade version) – Can be applied at sub-zero temperatures Jotun Jotamastic 80 can be applied using airless spray and using a brush or a roller with extra care taken to achieve the specified dry film thickness.

In the marine industry it can be used on outside hulls, exterior and interior areas and it can be used as a protective coating for offshore environments, refineries, power plants, bridges, building, mining equipment and general structural steel. Jotamastic 80 is primarily designed for maintenance and repair, only aluminium version is to be used in immersed environments. It can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Jotun Jotamastic 80 is suitable for properly prepared carbon steel and aged coating surfaces. Jotamastic 80 is designed for areas where optimum surface preparation is not possible or desired and can also be applied at sub-zero surface temperatures. Please call us for advice.Jotun Jotamastic 80 is a two-component polyamine cured epoxy mastic coating which is surface tolerant, high solids product. Note: Pack size is 4.6 litres or 18.3 litres including hardener. Use the Wintergrade version for application below 10☌ and faster curing times in normal conditions. The aluminium range is particularly suited for submerged areas (look in choose colour for Aluminium or Aluminium red-toned). Aluminium flakes within the coatings create an impenetrable barrier to water and increased coating flexibility.įor best results apply two coats above the waterline and three coats below the waterline at a typical spreading rate of 8 m² per litre. Jotamastic 80 is built on the same technology platform as Jotamastic 87 and is recommended as an anti-corrosive coating for steel above and below water. Jotamastic 80 is a two-pack epoxy mastic paint, which can be applied at low film thicknesses (from 75 to 200 microns in a single coat).

Download jotamastic 80 for free